blu bar vs blu 2.0 vs blu PRO - which one is right for you?
![blu bar vs blu 2.0 vs blu PRO](http://www.blu.com/assets/1mmno56mte7k/6dPBz3nDbs5JLACHppacux/62c310e62222468d306484b83aba14e2/blu_bar_article_header.webp?sq=high&im=Resize,width=7680)
Navigating the best vape devices on offer nowadays can be overwhelming. We know you’re super busy, and we want to make your choice as easy as possible. So, we’ve dug into the benefits of each of our blu vapes – both disposable and reusable - so you can get the right one to fit your life.
Let’s dive in and look at the differences between our blu bar 1000 disposable vape vs our reusable vapes (our closed blu 2.0 pod device and open blu PRO™ e-cig.) After that, the rest is up to you!
CHARGING YOUR DEVICE: BLU BAR 1000 VS BLU 2.0 VS BLU PRO
BLU BAR 1000
As blu bar 1000 is disposable you don’t need to charge it before use – it comes ready to vape – and it can’t be charged. So, blu bar 1000 is ideal for those vape-on-the-go situations where you have no time to plug the device in first.
BLU 2.0 CHARGING
Charging your blu 2.0 is really simple. Each device is shipped partially charged, but we recommend charging it fully before using. Here’s how to do it:
Unfold the attached USB-C cord from the pack and plug it into a USB-compatible charging port.
Connect the blu closed device to the USB-C cord with the charging contacts properly aligned.
Once your device begins charging, the red light will flash on and off when the battery is from 0-20%, the yellow light will flash when the battery is from 21-35%, and the blue light will flash when the battery is from 36-100%. Once the device is fully charged, the battery will display a solid blue light for five minutes before turning off. This should take around 45 minutes.
BLU PRO™ CHARGING
Charging your blu PRO™ takes a little longer but it is just as simple. Follow these steps:
Plug the USB charging cable into a compatible device or USB socket, then plug the charger into the port on the side of the blu PRO.
The light on the charger will glow red and the tip of the blu PRO™ will flash, showing it’s started charging. To fully charge will take around four hours.
Once it’s fully charged, the light on the charger will turn blue. This should take around four hours in total.
BLU BAR 1000
As blu bar is disposable, you don’t need to fill it before use – it comes ready to vape and cannot be re-filled.
REFILLING YOUR DEVICE: BLU BAR VS BLU 2.0 VS BLU PRO™
BLU 2.0 REFILLING
blu 2.0 is compatible with blu 2.0 liquidpods that easily click into the device. Simply insert your chosen flavour pod into the device until it clicks into place. The blu 2.0 has a magnetic lock to keep your pod in place.
BLU PRO™ REFILLING
The refillable nature of the blu PRO™ means that, once charged, you can use one of our blu vape e-liquid flavours to refill. To fill your clearomiser (where liquid converts to vapour) simply unscrew the mouthpiece from the top, put down a paper towel, and carefully fill the outside section of the clearomiser to just below the clear window, before screwing the device back together. Once switched on, you're ready to start vaping.